Power Wcb-75 Mini-Gear Oil Pump 20 1.5″

 

Electricity WCB Mini-Gear Oil Pump

All Metallic Equipment Pump
This pump was CZPTly created for pumping diesel fuel. It could be employed for pumping oily liquids this kind of as diesel, biodiesel, kerosene, and warm vegetable oil or chilly vegetable oil if began up effectively (see beneath). This pump works exceptional for biodiesel processor purposes.
This pump can handle viscous fluids this kind of as vegetable oil. When the oil is scorching, the pump handles it without having any problems. If the oil is cold, typically significantly less than 70°, the pump could need to have a tiny leap commence to get it working up to entire velocity. In get to do this, install a ball valve somewhere on the suction aspect of the pump. Shut the ball valve and flip on the pump. After the pump is up to entire rotation (1 2nd or less) the ball valve can be opened and it will pump the oil with no issue. This may possibly also be completed by removing the suction line from a tank of oil. Permit the pump to suck air 1st to get up to speed, then dump the suction hose into the tank and it will suck the oil by means of easily. The pump has a higher rotation rate, so if the pump commences with viscous fluid presently in the traces, the pump will wrestle to get up to pace and will use way too numerous amps and overheat. Enabling the pump to get up to complete speed prior to introducing thick fluids is recommended. Generally, this pump does not require any form of assistance for gasoline oils this sort of as diesel gas.
The mini-gear pump is a pump hooked up to the motor by a shaft. The pump itself is all steel (metallic gears) and can pump hot fluids with no overheating the separate motor which is related by a steel shaft coupling. The motor is higher energy and has thermal security, which will automatically shut off the pump in situation temperatures get to levels which chance overheating of the motor.
The motor is made to most United states of america Specifications.
These pumps produce potent suction and are self-priming. They can operate dry for intermediate amounts of time, permitting for the use of a suction hose for accumulating fluids from a tank. The metallic gears which push the pumping action can manage a lot of fluids, even if partly dirty. In the situation of vegetable oil, any gentle particles will move right through the pump with no difficulties, and are frequently pulverized by the gears them selves. Challenging components, such as metals, ought to not be allowed to move by means of the pump to avert hurt.
 
WVO Collection:
These pumps have large suction electrical power and are great for accumulating vegetable oil (when warm ample) from tanks. No matter whether basically transferring oil or collecting oil, these pumps supply fast pumping with no require for priming the suction hose.
 
Biodiesel:
These pumps are regarded to be much safer for biodiesel production than the harbor freight obvious water pumps because the pump is individual from the motor. The positive aspects of the continuous features and high stream prices make this an excellent pump for a biodiesel processor. It will pump the waste vegetable oil, biodiesel and even glycerin with no any difficulty.
 
Viscous & Chilly Oils:
This pump can manage viscous fluids these kinds of as vegetable oil. When the oil is scorching, the pump handles it with no any issues. If the oil is chilly, normally less than 70°, the pump might require a small soar commence to get it working up to entire pace. In purchase to do this, install a ball valve somewhere on the suction facet of the pump. Shut the ball valve and turn on the pump. Once the pump is up to total rotation (1 second or less) the ball valve can be opened and it will pump the oil with no problem. This may also be accomplished by taking away the suction line from a tank of oil. Allow the pump to suck air very first to get up to pace, then dump the suction hose into the tank and it will suck the oil by means of simply. The pump has a higher rotation price, so if the pump commences with viscous fluid currently in the traces, the pump will wrestle to get up to speed and will use as well a lot of amps and overheat. Allowing the pump to get up to full speed prior to introducing thick fluids is advised. Typically, this pump does not need any form of guidance for fuel oils this sort of as diesel fuel.
 
Procedure Guidelines:
Although the pump can run dry for the circumstance of priming, it is very best not to operate the pump dry repeatedly for a long period of time of time to stop the risk of damage to the pump from absence of lubrication. Fluids must be stored cleanse to steer clear of clogging of the gears. Coarse strainers (four hundred+ micron) can be utilized on the suction finish to stop huge particles from entering the pump. Do not use fine filters on the suction side or the restriction will prevent adequate circulation.
End users who pump vegetable oil need to also be mindful of that occasionally when cold oil sits in the pump, the pump can have trouble receiving up to speed. If this occurs, the pump must be started with air on the suction line or with a ball valve on the suction line entirely shut. After the pump is up to speed (a matter of 1 or 2 seconds) the ball valve can be opened or fluid released to the pump and it will pump as normal.
Connections:
Our Electrical power WCB Mini-gear Pumps occur with a flange attachment and a fitting to grow the dimension of the port. We use the flange to avoid pressure drop heading into the head of the pump. This flange has a fluoroelastomer (like Viton®) gasket for a biodiesel suitable seal. This flange can be replaced with one more flange of your selection if need be.
Stainless Metal Pump Heads: For pumps with stainless steel heads, we presently do not have flanges obtainable, and the connections are created immediately to the growth fittings. Some force reduction foremost to the head might occur on these pumps and partly lessen flow of the fluid from requirements unless of course a flange is hooked up.
 
Lubrication
This pump can only be employed for pumping oily liquids. It can’t be used for liquids that are non-lubricating or the gears in the pump will lock up and corrode.
 
Piping:

Use a sound pipe or sturdy hose that will not collapse beneath the large vacuum produced from the suction of the pump. The pump arrives with fittings, which adapt to the acceptable dimensions of piping/tubing needed for adequate movement. it is best not to size down the suction facet apart from in the situation of the WCB75, in which it can be sized down to one-1/four” piping for much better suction as opposed to greater stream price.
 

WCB Mini-Gear Pump Specialized Parameters

Model

WCB30

WCB50

WCB75

Circulation rate

30 L/m (8 gpm)

50 L/m (thirteen gpm)

seventy five L/m (20 gpm)

Stress

.three Mpa (forty three psi)

.three Mpa (43 psi)

.three Mpa (43 psi)

Max Suction Height

five meters (16 toes)

5 meters (16 toes)

With 1.five” Tubing: 4 Meters (twelve.8 Ft)
With one.25″ Tubing: five meters (16 ft)

Max Head

30 Meters

30 Meters

thirty Meters

Pump Housing

Forged Iron or Stainless Metal

Proportions (LxWxH)

fifteen”x6.5″x8″

fifteen”x6.five”x8″

16″x6.five”x8″

Enter Voltage

110v AC / sixty Hz

110v AC / sixty Hz

110v AC / sixty Hz

Velocity (rpm)

3480

3480

3480

Max Power

.375 KW (one/two HP)

.550 KW (3/four HP)

.750 KW (one HP)

Inlet/Outlet Threads

three/four” NPT

1″ NPT

one.five” NPT

Excess weight

fourteen.27 kg (31.four lb)

15.22 kg (33.50 lb)

17.ninety five kg (39.fifty lb)