Hydraulic Screen Filter for Membrane Protection Filtration System

Hydraulic Screen Filter for Membrane Protection Filtration System

Product framework

 1. Automated drain valve
 2. CZPT motor
 3. Strain indicator
 4. H2o outlet
 5. Water inlet
 6. Screen
 7. Suction nozzle

Solution basic principle
The drinking water flows via the monitor and the particles are retained on the within of the screen of the filter factor. The filtered drinking water then flows out through the outlet.

Self-cleansing manner can be commenced by pressing, timing or manual three methods, adhering to the principle of stress difference.

When the interior and external strain difference reaches the set price,  the self-cleaning method commences.Drain pipe hydraulic valve open, sucking the scanner to make damaging stress suction nozzle inside, absorbing impurities, at the same time sucking scanner in below hydraulic motor together the within surface mesh do reciprocating screw, movement, no cleansing blind location, impurities by the discharge outlet.

The cleansing time of self-cleansing filter is established by the controller in advance, the drain valve is closed after cleansing, and small water decline in cleaning method.

Complex parameters
≥   Single highest filtration movement up to 1200m3 / h
≥   CZPT optional drilling (4000-800μm), wedge (a thousand-50μm) woven composite (800-20μm)
≥   minimum functioning stress ≥ .1Mpa (sewage valve for the electric powered ball valve)
   ≥0.18Mpa (discharge valve for the electromagnetic diaphragm valve)
≥   Maximum operating presure ≤ one.6MPa (special customizable)
≥   Operating temperature ≤ 65 ºC
≥ Power: 380V / 50Hz
≥ Cleansing technique: suction sort
≥  Cleansing time: 10-200 seconds adjustable
≥   Control: strain, time, manual and PLC

CZPT content
Shell:   carbon steel, 304 stainless steel, 316L stainless steel
Screen: 304 stainless metal, 316L stainless metal
Drain valve, cast iron,copper,stainless steel,PVC,nylon
Controller: PVC, aluminum
Seal ring: EPDM rubber
Suction: stainless metal, PVC
Decline of force desk

DLX-FW sequence self-cleansing filter specification desk

Design Water in/outlet
L    (mm) L1
Max flow
DLX-FW-80 80 450 1775 2475 493 .25 50 a hundred and eighty
DLX-FW-100 one hundred 450 1775 2475 493 .25 80 198
DLX-FW-one hundred fifty one hundred fifty 900 2175 3175 545 .25 150 328
DLX-FW-two hundred 200 900 2175 3175 617 .twenty five 320 375
DLX-FW-250 250 1100 3110 4910 720 .25 450 470
DLX-FW-300 300 1100 3110 4910 810 .fifty five 600 519
DLX-FW-350 350 1100 3110 4910 810 .55 850 660
DLX-FW-four hundred four hundred 1100 3110 4910 910 .fifty five 1200 708


Organization Infomation 

Contact us


Hydraulic Screen Filter for Membrane Protection Filtration System