Glue Station System Hydraulic Mill Roll Stand Single Facer Machine Corrugated Cardboard Production Line

Glue Station System  Hydraulic Mill Roll Stand  Single Facer Machine  Corrugated Cardboard Production Line

HRB-1800 ZJZ GLUE STATION Technique


 

STRUCTURAL Characteristics :

★ Give the starch adhesive to the corrugated one facer ,two glue machine and some other gluing equipment.

★ Horizontal glue device can in the meantime matched  with major body glue and provider glue, and mixing, glue big.

★ Making room storage barrels adhesive resolution was to use the glue pump rubber equipment storage barrels, adhesive remedy for equipment.

★ Storage barrels, plastic barrels with mixing gadget, stay away from glue solution precipitation agglomerate.

★ Method unit with provider vessel, primary tank, storage tank, and send the glue pump, the back glue pump, etc.

★ Glue method undertake glue cycle,rest glue go back again to the glue square cylinder,Liquid degree float computerized control,the again glue a bucket of glue liquid currently being overwhelmed back again with glue tools storage bucket,cycle for glue,Conserve the glue answer,stop the glue solution in the rubber plate pasting and caking precipitation.

★ Work has been finished, the residual gum dividend overall pipeline with rubber gear rubber pumped again rubber room storage barrels, for following time use.

★ Responsible for complex assistance, training adhesive dispensing approach.

Specialized PARAMETERS :

1. Horizontal body glue mixer : one      

2. Provider glue mixer :1

three. Storage glue mixer : one particular      

4. Plastic buckets on double coater : a single

five. Two coating machine back again plastic buckets : a single  

6. Plastic buckets on one equipment : two

seven. Single equipment back plastic buckets: two    

eight. Get rid of glue dispensing pumps:  four

GLUE BARREL DIAMETER PARAMETERS :

1. Horizontal entire body glue mixer:1250mm×1000mm×900mm

2. Carrier glue mixer  diameter:  ¢800mm×900mm

3. Diameter plastic bucket on Double Glue:¢800mm×1000mm    Plastic buckets on one device:¢800mm×1000mm

4. Storage tank diameter : ¢1200mm×1200mm

Electricity MOTORS AND ELECTRICAL PARAMETERS :

one. Horizontal entire body glue mixer :  3KW   380V    50Hz

two. Provider glue mixer :  two.2KW(Common three-section)     380V   50Hz

three. Output plastic pump motor :  2.2KW(Ordinary three-phase)     380V    50Hz

4. Storage Tank Motor : 1.5KW(Normal a few-phase)    380V    50Hz

CERTIFICATIONS :

FAQ :

Q: Are you a factory or investing company?
A: We are specialist manufacturer with export license.

Q: Can you do OEM?
A: Of course,we can.

Q: Can i CZPT the equipment from your company?
A: Of course you can,we can manufacture the device based on your prerequisite.

Q: How does your manufacturing facility do relating to the high quality manage?
A: Top quality is the daily life of our manufacturing unit. All the raw content we use are normal part,and skillful personnel
get care of each details  of handing the producing and packing method.

Q: How ought to i do to put in and running the machine if i do not know?
A: If you need to have,we will ship engineer to your factory for set up and education.

IF YOU INTERESTED, Please Send out MESSAGE TO ME, AND I WILL REPLY YOU ASAP !!!

     
                                                                                                                                  — HRB CZPT CATHY

 

Glue Station System  Hydraulic Mill Roll Stand  Single Facer Machine  Corrugated Cardboard Production Line

Tags: