02-04 RSX Kind S
02-04 RSX Base
01-05 Civic EP3 (Type S or K24 Swap)
**For recommendations click here**
*Race-Grade Model – Makes use of Raychem DR-25 loom and improve TXL Wire with nylon braid for elevated strength.
*Electrical power Wire Alternative – Integrated Energy Wire adds an extra electrical power wire to the harness. This will give you a straightforward way to run electricity from alternator to starter (Then daisy chain to alternator). This does include some measurement to the harness and lowers flexibility slightly. The fuse box have to be shut to the shock tower or beneath the dash. RSX/EP3/K-Swap EM2 have to run CZPT energy wire.
*New design makes use of manufacturing unit RSX connectors.
*Will NOT suit RHD automobiles or RWD automobiles.
The Engine Harness is created as a high good quality replacement 02-04 RSX Sort-S harness that provides a super clear search. We have made the harness with heaps of attributes so it will work with virtually all K-Series engine swaps and the 02-04 RSX Sort S. It involves all the necessary plugs with a handful of extras (Admirer Change, IACV, Temp Sensor, And so on). We utilized only SAE accredited automotive grade wiring resistant to dampness and most solvents to ensure good quality and sturdiness. Large quality armed forces grade warmth shrink loom is utilized to protect complete harness which is resistant to fuel and diesel. It is rated for -55° C to 150° C (-67° F to 320° F). We have also utilised a well-liked and clean tucked wire format. The principal harness runs more than the valve protect and even hides the injector plugs, which arrive up from underneath the manifold. RSX injector plugs arrive with all harnesses. The pins on RSX injector plugs can be fitted into the oem RDX plugs which tends to make switching fast and straightforward. We have included the charge harness and alternator electricity wire into the harness. We employed a slim, but high quality energy wire to support hold the total dimension down. On swap chassis, the electrical power wire will work with fuse box in manufacturing unit place or relocated beneath the sprint. Independent electrical power wire is CZPT for other chassis and people that prefer to run their very own demand wiring. CZPTything is labeled plainly to make certain a basic installation and no confusion.
All plugs included except EVAP and AC
Masking is gas and diesel resistant and rated for -55° C to 150° C (-67° F to 320° F)
SAE Accredited Automotive Grade Wiring
All plugs are labeled
Harness runs in excess of valve protect (Can be lined with coil pack go over)
Integrated energy wire and charge harness. Functions with fuse box in inventory place or relocated below dash.
Injector wiring runs from below manifold between center runners.
Floor wire relocated to stud below coil pack include (rather of front of the valve include)
Contains one wire temp sensor wire (For k-swap cars stock cluster)
3 Aux wires run from Eu to underneath intake manifold. Two European pins pre-installed.
Wiring extended ample for each VSS reduced frequency or substantial frequency (Substantial Frequency transmissions will demand repining plug and slight modification to VSS)
Further knock sensor plug included.
Every single harness is inspected and tested just before shipping and delivery.
RSX injectors plugs occur normal (RDX injectors can be very easily switched)
We are a specialist wire harness manufacturing facility, we from connector mildew improvement to wire harness creation.
We have our own robust crew, engaged in the automotive wire harness sector for much more than ten many years
I can customise the production for you according to the drawing or sample
two.100% analyzed ahead of shipment
3.We make electrical wires,so have aggressive price tag
four.We also accept OEM harness
5.We can generate CZPTized objects according to your requirements
six.We will give you higher high quality products
You are welcome to contact us and pay a visit to our firm to check with and negotiate company.