DC Z4 Series 500kw Large Power Electric Motor

DC Z4 Series 500kw Large Power Electric Motor

Item Description:
 
DC motor is a rotating motor that can change DC electrical strength into mechanical vitality (DC motor) or mechanical energy into DC electric strength (DC generator). It is a motor that can transform DC and mechanical strength into a single another. When it operates as a motor, it is a immediate current motor, which converts electrical strength into mechanical vitality when it operates as a generator, it is a immediate present generator, which converts mechanical vitality into electrical vitality.
 

Merchandise Title DC Z4 sequence 500KW Huge Electrical power CZPT Motor
Motor Kind DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition composition The composition of DC motor ought to consist of two parts: stator and rotor. The static element of DC motor is called stator. The major purpose of stator is to generate magnetic area, which is composed of foundation, primary magnetic pole, commutation pole, finish cap, bearing and brush system. Managing part is called rotor, whose primary operate is to make electromagnetic torque and inductive electromotive pressure. It is the hub of power conversion of DC motor. So it is also generally named armature, which is composed of rotor, armature main, armature winding, commutator and fan.
Model Z Kind
Seat variety Z315-Z1000
power sixty~2800kW
Voltage 220~1000V
Torque selection 1.5 ~180kNm
Safety stage IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Operating speed  Constant Speed /Lower Velocity /Modify Pace /High Speed Other 
Principal classification DC Motor is a device that converts mechanical strength into DC energy. It is primarily utilized as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation power offer of alternator. Although in places in which DC electrical power is required, AC energy rectifier is also utilised to convert AC into DC power, but from some aspects of overall performance, AC rectifier energy source can not entirely substitute DC generator.  
Software DC motors are widely used in tape recorders, video clip recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Servicing approach Professional motor maintenance center motor upkeep procedure: cleansing stator and rotor – replacing carbon brush or other areas – vacuum F stress dipping paint – drying – Calibration equilibrium.
one. Use environment should be often dry, motor surface area ought to be kept thoroughly clean, air intake need to not be hindered by dust, fibers and other obstructions.
2. When the thermal safety of the motor continues to function, it need to be ascertained whether the fault arrives from the motor or the overload or the environment worth of the protective device is also lower. After reducing the fault, it can be place into procedure.
3, make sure that the motor is nicely lubricated for the duration of procedure. The common motor runs for about 5000 hrs, that is to say, lubricating grease ought to be extra or changed. When bearing overheating or lubricating deterioration is found in operation, the hydraulic pressure must adjust lubricating grease in time. When replacing grease, the previous grease need to be taken off, and the oil groove of bearing and bearing go over should be washed with gasoline. Then ZL-3 lithium grease should be loaded with 1/two (two poles) and 2/three (4 poles, 6 poles and eight poles) of the cavity amongst the interior and outer rings of the bearing.
4. When the daily life of the bearing is over, the vibration and sound of the motor will boost clearly. When the radial clearance of the bearing reaches the subsequent benefit, the bearing ought to be changed.
5, when taking away the motor, it is Okay to get rid of the rotor from the shaft extension or the non extension conclude. If it is not essential to unload the supporter, it is a lot more handy to consider out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from becoming destroyed.
6. When changing the windings, the form, size, turns and gauges of the authentic windings have to be recorded. When these info are lost, they must be attained from the producer and the authentic designed windings need to be changed at will, which usually deteriorates 1 or numerous performance of the motor or even can make it unattainable to use them.

 

 

DC Z4 Series 500kw Large Power Electric Motor